Rainwater Harvesting
in Hyderabad

Every rainwater harvesting system starts with an honest assessment — how much rain your site actually gets, how much roof and paved area you have as a catchment, and what the soil and aquifer conditions look like below ground. In Hyderabad and across Telangana, borewell depletion and hard rock geology mean the recharge design needs to be sized against real numbers, not thumb rules.

• Catchment area survey — rooftop, paved, landscape
• Historic rainfall data and yield estimation
• Soil percolation and infiltration tests
• Groundwater table and borewell yield assessment
• GHMC and Telangana groundwater-rule compliance check
• Storage vs recharge ratio recommendation

Rooftop harvesting is the highest-quality water on your site — clean, easy to collect, and simple to route. We install gutters, down-pipes, first-flush diverters, and pre-filters sized for peak monsoon flows so the system never overflows during a Hyderabad cloudburst. Every joint is UV-stable and every filter is serviceable without dismantling the pipework.

• PVC and stainless-steel gutter systems
• Sized down-pipes and rainwater leaders
• First-flush diverters to reject initial silt
• Mesh pre-filters and sediment traps
• Terrace waterproofing and drainage integration
• Serviceable inspection chambers

For most Hyderabad villas, factories, and gated communities the priority is recharging depleted borewells — not storing surface water. We design and build recharge pits, trenches, and dug-well or borewell recharge shafts sized against your catchment and the local aquifer profile. Done right, this reverses the seasonal drop in your borewell yield within a couple of monsoon cycles.

• Percolation pits sized to catchment yield
• Recharge trenches for linear catchments
• Direct borewell recharge with sand-gravel filters
• Dug-well and abandoned-well recharge
• Injection wells for confined aquifers
• De-silting chambers to keep recharge open

Where surface water reuse makes sense — farmhouses, gated communities with landscaped areas, factories with process washdown needs — we build underground and overhead storage tanks with filtration trains sized for the end use. Non-potable reuse for irrigation, flushing, and washdown can cut a facility's municipal water bill in Hyderabad by 40–60% in a normal year.

• RCC underground storage tanks
• Overhead PVC and polymer tanks
• Multi-stage sediment and carbon filtration
• UV sterilisation for non-potable reuse
• Pumping and distribution networks
• Automatic level and quality monitoring

GHMC-approved building plans mandate rainwater harvesting for most new builds — but a stamp on a drawing doesn't mean water is actually being recharged. We install to spec, document with photographs and as-built drawings for GHMC and Telangana Groundwater Department submissions, and hand over with a maintenance calendar so filters, pits, and first-flush units keep working monsoon after monsoon.

• GHMC building-plan RWH compliance
• Telangana Groundwater Department documentation
• As-built drawings and photographic records
• Annual pre-monsoon inspection and desilting
• Filter media replacement and pit cleaning
• Retrofit for existing homes, farms, and factories